Salta al contenuto principale

Sostituzione dello schermo del Google Pixel 6 Pro

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Traduzione in corso passo 8

Inglese
Italiano
Passo 8
Google Pixel 6 Pro Screen Replacement: passo 0, immagine 1 di 3 Google Pixel 6 Pro Screen Replacement: passo 0, immagine 2 di 3 Google Pixel 6 Pro Screen Replacement: passo 0, immagine 3 di 3
  • The screen of the Google Pixel 6 Pro is not only held in place by adhesive but also small plastic pins. In case your opening pick gets blocked during the screen removal procedure it means you inserted your pick too deep underneath the screen. Only insert the tip of the opening pick (~3-4 mm) when slicing the display adhesive.

  • Insert a third opening pick underneath the bottom left corner of the screen.

  • Slide the opening pick along the left edge of the screen to slice the adhesive.

  • Leave the opening pick in the top left corner to prevent the adhesive from resealing.

Lo schermo del Google Pixel 6 Pro non è tenuto in posizione solamente da adesivi, ma anche da piccoli pin di plastica. Nel caso in cui il tuo plettro si bloccasse durante la procedura di rimozione del display, significa che lo hai inserito troppo in profondità. Inserisci solo la punta del plettro (circa 3-4 mm) per tagliare l'adesivo del display.

Inserisci un terzo plettro sotto l'angolo inferiore sinistro dello schermo.

Fai scorrere il plettro lungo il bordo sinistro dello schermo per tagliare l'adesivo.

Lascia il plettro nell'angolo in alto a sinistra per evitare che l'adesivo si riattacchi.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.